hz – -Translation – Keybot Dictionary

Spacer TTN Translation Network TTN TTN Login Deutsch Français Spacer Help
Source Languages Target Languages
Keybot 13 Results  www.industry.siemens.com
  SINAMICS G150 Cabinet U...  
Show textShow cached sourceOpen source URL
≤ 72 dB (A) with 50 Hz line frequency
Compare text pagesCompare HTM pagesOpen source URLOpen target URLDefine industry.siemens.com as primary domain
≤ 72 dB (A) bei 50 Hz Netzfrequenz
  SINAMICS G150 Cabinet U...  
Show textShow cached sourceOpen source URL
47 to 63 Hz
Compare text pagesCompare HTM pagesOpen source URLOpen target URLDefine industry.siemens.com as primary domain
47 bis 63 Hz
  LOHER DYNAVERT I Curren...  
Show textShow cached sourceOpen source URL
60 Hz, depends on the motor
Compare text pagesCompare HTM pagesOpen source URLOpen target URLDefine industry.siemens.com as primary domain
Maximale Ausgangsfrequenz:
  SINAMICS SL150 - Drive ...  
Show textShow cached sourceOpen source URL
The 40 to 80-pole ring motors with salient pole rotors are typically operated at approx. 6 Hz (approx. 10 rpm).
Compare text pagesCompare HTM pagesOpen source URLOpen target URLDefine industry.siemens.com as primary domain
Die 40- bis 80-poligen Ringmotoren mit Schenkelpolläufer werden typischerweise mit ca. 6 Hz (ca. 10 min -1) betrieben.
  SINAMICS DCM DC Convert...  
Show textShow cached sourceOpen source URL
45 to 65 Hz
Compare text pagesCompare HTM pagesOpen source URLOpen target URLDefine industry.siemens.com as primary domain
45 bis 65 Hz
  SINAMICS SL150 - Drive ...  
Show textShow cached sourceOpen source URL
Mine hoist drives are equipped with 12 to 16-pole synchronous motors with salient pole rotors with a rated frequency of approx. 5 to 10 Hz operating at speeds from about 50 to 90 rpm.
Compare text pagesCompare HTM pagesOpen source URLOpen target URLDefine industry.siemens.com as primary domain
Die Schachtförderantriebe mit 12- bis 16-poligen Synchronmotoren mit Schenkelpolläufer benötigen ca. 5 bis 10 Hz Nennfrequenz bei Drehzahlen von ca. 50 bis 90 min -1.
  SINAMICS DCM Control Mo...  
Show textShow cached sourceOpen source URL
45 to 65 Hz
Compare text pagesCompare HTM pagesOpen source URLOpen target URLDefine industry.siemens.com as primary domain
45 bis 65 Hz
  SINAMICS S150 Cabinet U...  
Show textShow cached sourceOpen source URL
47 to 63 Hz
Compare text pagesCompare HTM pagesOpen source URLOpen target URLDefine industry.siemens.com as primary domain
Netzarten:
  SINAMICS SL150 - Drive ...  
Show textShow cached sourceOpen source URL
Rolling drives that run continuously typically have 6-pole cylindrical rotor synchronous motors with a rated frequency of approx. 7 Hz (approx. 140 rpm) and a maximum frequency of approx. 20 Hz (approx. 400 rpm), while the large hot reversing stands are equipped with 12-pole motors with a frequency of approx.
Compare text pagesCompare HTM pagesOpen source URLOpen target URLDefine industry.siemens.com as primary domain
Die durchlaufenden Walzantriebe haben typischerweise bei 6-poligen Synchronmotoren mit Vollpolläufer ca. 7 Hz Nennfrequenz (ca. 140 min-1) und ca. 20 Hz Maximalfrequenz (ca. 400 min -1), während die großen Warm-Reversiergerüste mit 12-poligen Motoren mit ca. 5 / 10 Hz Frequenz (ca. 50 / 100 min -1) betrieben werden.
  SINAMICS SL150 - Drive ...  
Show textShow cached sourceOpen source URL
Rolling drives that run continuously typically have 6-pole cylindrical rotor synchronous motors with a rated frequency of approx. 7 Hz (approx. 140 rpm) and a maximum frequency of approx. 20 Hz (approx. 400 rpm), while the large hot reversing stands are equipped with 12-pole motors with a frequency of approx.
Compare text pagesCompare HTM pagesOpen source URLOpen target URLDefine industry.siemens.com as primary domain
Die durchlaufenden Walzantriebe haben typischerweise bei 6-poligen Synchronmotoren mit Vollpolläufer ca. 7 Hz Nennfrequenz (ca. 140 min-1) und ca. 20 Hz Maximalfrequenz (ca. 400 min -1), während die großen Warm-Reversiergerüste mit 12-poligen Motoren mit ca. 5 / 10 Hz Frequenz (ca. 50 / 100 min -1) betrieben werden.
  SINAMICS SL150 - Drive ...  
Show textShow cached sourceOpen source URL
Rolling drives that run continuously typically have 6-pole cylindrical rotor synchronous motors with a rated frequency of approx. 7 Hz (approx. 140 rpm) and a maximum frequency of approx. 20 Hz (approx. 400 rpm), while the large hot reversing stands are equipped with 12-pole motors with a frequency of approx.
Compare text pagesCompare HTM pagesOpen source URLOpen target URLDefine industry.siemens.com as primary domain
Die durchlaufenden Walzantriebe haben typischerweise bei 6-poligen Synchronmotoren mit Vollpolläufer ca. 7 Hz Nennfrequenz (ca. 140 min-1) und ca. 20 Hz Maximalfrequenz (ca. 400 min -1), während die großen Warm-Reversiergerüste mit 12-poligen Motoren mit ca. 5 / 10 Hz Frequenz (ca. 50 / 100 min -1) betrieben werden.