gase – -Translation – Keybot Dictionary

Spacer TTN Translation Network TTN TTN Login Deutsch Français Spacer Help
Source Languages Target Languages
Keybot 53 Results  susanne-von-laun.de
  Spaltrohrgebläse - AERZ...  
Ausführung HM für neutrale Gase:
HM version for neutral gases:
  AERZEN Vakuumtechnik is...  
Die dauerlauffesten AERZEN Spaltrohrgebläse der Baureihen CM (für aggressive Gase) und HM (für neutrale Gase) ermöglichen besonders kurze Abpumpzeiten und werden in der industriellen Hochvakuumtechnik für einen Vakuumbereich von 200 bis 10-5 mbar eingesetzt.
The AERZEN canned motor blowers series CM (for aggressive gases) and HM (for neutral gases) suitable for permanent operation make particularly short pumping times possible and are used in industrial high vacuum technology for a vacuum range of 200 bis 10-5 mbar. These blowers work with a hermetic drive, as the drive shaft is sealed by an integrated canned motor without connecting passage to atmosphere. Due to the almost doubling of the speed to 6,000 up to 7,200 rpm with the same size, very short pumping cycles in the seconds range result, which leads to a considerable acceleration of the production processes for the operator. Even if, for increasing the performance further, two backing pumps and one canned motor blower are integrated into a pumping set, the entire unit still distinguishes itself by a particular compact design - a special advantage concerning multi-systems with numerous pumping sets. Canned motor blowers made by AERZEN are available
  AERZEN Vakuumtechnik is...  
Die dauerlauffesten AERZEN Spaltrohrgebläse der Baureihen CM (für aggressive Gase) und HM (für neutrale Gase) ermöglichen besonders kurze Abpumpzeiten und werden in der industriellen Hochvakuumtechnik für einen Vakuumbereich von 200 bis 10-5 mbar eingesetzt.
The AERZEN canned motor blowers series CM (for aggressive gases) and HM (for neutral gases) suitable for permanent operation make particularly short pumping times possible and are used in industrial high vacuum technology for a vacuum range of 200 bis 10-5 mbar. These blowers work with a hermetic drive, as the drive shaft is sealed by an integrated canned motor without connecting passage to atmosphere. Due to the almost doubling of the speed to 6,000 up to 7,200 rpm with the same size, very short pumping cycles in the seconds range result, which leads to a considerable acceleration of the production processes for the operator. Even if, for increasing the performance further, two backing pumps and one canned motor blower are integrated into a pumping set, the entire unit still distinguishes itself by a particular compact design - a special advantage concerning multi-systems with numerous pumping sets. Canned motor blowers made by AERZEN are available
  Für jede Anwendung die ...  
Die ölfrei arbeitenden Schraubenverdichter der Baureihe VR bewähren sich in der Prozessgas-Technik. Durch die Möglichkeit der Wassereinspritzung können Anwender diese Anlagen für Gase mit schwankenden Molgewichten, Verunreinigungen und Polymerisationsneigung einsetzen.
The oil-free operating VR series screw compressors have proven themselves in process gas engineering. Through the option of water injection, operators can use these systems for gases with fluctuating molecular weights, impurities and a tendency to polymerise. They are also the ideal choice for processes that must not contain oil. Pressures differentials are between 3.5 and 25 bar with single-stage compression. In the multi-stage version maximum final pressures of 53 bar abs. can be achieved.
  Vakuumtechnik mit Geblä...  
Neben den kompakten Baumaßen, die solche Gebläse ideal für die Kombination mit weiteren Vorpumpen machen, sind sie in verschiedenen Bauformen für unterschiedliche Einsatzbereiche erhältlich. Man unterscheidet hier zwischen Bauform CM für aggressive Gase und der Bauform HM für neutrale Gase.
No matter which AERZEN solution you choose for your vacuum production needs, all components of pre-pumps and vacuum blowers are thermally and energetically coordinated perfectly together. Thus, a more reliable and durable pump system is guaranteed while focusing on energy efficiency. AERZEN canned motor blowers are recommended for the highest demands in industrial vacuum technology. They are the most suitable for long-term operation and feature a short expel time. Besides the compact cubic capacity, with which such blowers are ideal in combination with additional blowers, they are available in various constructions for different areas of application. AERZEN offers the CM for aggressive gases and HM for neutral gases.
  Drehkolbengaszähler ana...  
Drehkolbengaszähler von AERZEN können alle nichtaggressiven Gase nach DVGW- Arbeitsblatt G 260 messen. Dazu Erdgas, Stadtgas, Kokereigas, Raffineriegas, Propan, Butan, Flüssiggas-Luftgemisch, Methan, Aethylen, Wasserstoff und andere Gase.
AERZEN rotary piston gas meters can measure all nonaggressive gases as per the DVGW Worksheet. G 260, including natural gas, town gas, coke oven gas, refinery gas, propane, butane, liquid gas and air mixtures, methane, ethylene, hydrogen and other gases. The gas meters are equipped for horizontal and vertical flow directions. For this, they are fitted with either a special double-roller counter or a digital counter. This is a decisive advantage, because it means that the direction of flow can be adjusted without necessitating any changes to the counter, and without requiring supervised calibration. This not only reduces storage requirements, but also brings reductions in additional costs for short-term adjustments. Switching to the required direction of flow on site is easy and requires no tools.
  AERZEN in der Prozessga...  
In den genannten Branchen geht es oftmals um hochkritische Prozesse, die maximale Vorkehrungen zur Prozesssicherheit erfordern: in der chemischen oder petrochemischen Industrie kommen die verschiedensten, zum Teil toxischen und/oder explosiven Gase zum Einsatz: Wasserstoff und Methan-Mischgase, Kältemittel, Acetylene, Äthylen, Kalkofengas, Reichgas, Gichtgas, Styren, Syntheserohgas, Butadien, Vinylchlorid bis hin zu Schwefelwasserstoff müssen gefördert oder verdichtet werden.
In the named branches, it often concerns highly-critical processes, which require maximum precautions for process safety: In the chemical process industry or petrochemical industry, sometimes highly toxic and/or explosive gases are used: hydrogen and methane mixed gases, coolants, acetylene, ethylene, lime kiln gas, rich gas, furnace gas, styrene, synthesis gas, butadiene, vinyl chloride and hydrogen sulphide all need to be handled or compressed. In pharmaceuticals and food processing, aside from process safety, the focus is on the hygienic handling of products – 100-percent purity of process air is indispensable.
  Drehkolbengaszähler ana...  
Drehkolbengaszähler von AERZEN können alle nichtaggressiven Gase nach DVGW- Arbeitsblatt G 260 messen. Dazu Erdgas, Stadtgas, Kokereigas, Raffineriegas, Propan, Butan, Flüssiggas-Luftgemisch, Methan, Aethylen, Wasserstoff und andere Gase.
AERZEN rotary piston gas meters can measure all nonaggressive gases as per the DVGW Worksheet. G 260, including natural gas, town gas, coke oven gas, refinery gas, propane, butane, liquid gas and air mixtures, methane, ethylene, hydrogen and other gases. The gas meters are equipped for horizontal and vertical flow directions. For this, they are fitted with either a special double-roller counter or a digital counter. This is a decisive advantage, because it means that the direction of flow can be adjusted without necessitating any changes to the counter, and without requiring supervised calibration. This not only reduces storage requirements, but also brings reductions in additional costs for short-term adjustments. Switching to the required direction of flow on site is easy and requires no tools.
  Vakuumtechnik mit Geblä...  
Neben den kompakten Baumaßen, die solche Gebläse ideal für die Kombination mit weiteren Vorpumpen machen, sind sie in verschiedenen Bauformen für unterschiedliche Einsatzbereiche erhältlich. Man unterscheidet hier zwischen Bauform CM für aggressive Gase und der Bauform HM für neutrale Gase.
No matter which AERZEN solution you choose for your vacuum production needs, all components of pre-pumps and vacuum blowers are thermally and energetically coordinated perfectly together. Thus, a more reliable and durable pump system is guaranteed while focusing on energy efficiency. AERZEN canned motor blowers are recommended for the highest demands in industrial vacuum technology. They are the most suitable for long-term operation and feature a short expel time. Besides the compact cubic capacity, with which such blowers are ideal in combination with additional blowers, they are available in various constructions for different areas of application. AERZEN offers the CM for aggressive gases and HM for neutral gases.
  Vakuumtechnik mit Geblä...  
Hierfür stehen zum Beispiel Wasserringpumpen, ölgeschmierte Drehschieberpumpen oder regelbare Klauenpumpen zur Verfügung. Mit ihnen lassen sich neutrale Gase gut verarbeiten. Bei sehr hohen Anforderungen an die Evakuierung von Prozessgasen kann der Einsatz von Schraubenvakuumpumpen in Sonderanlagen sinnvoll sein.
The majority of the pre-pump systems are selected specifically for the desired areas of application. Therefore, water ring pumps, greased rotary vane pumps or adjustable claw pumps are available. And, with them, neutral gases can be handled very well. The application of screw vacuum pumps make sense when the evacuation requirements are extremely high. Similar to screw compressors, a screw vacuum pump works very uniformly and precisely. The high energy efficiency, low-noise and low wear-and-tear in vacuum production via screw vacuum pumps is certainly expensive.
  Produktübersicht Drehko...  
Die Angebotspalette im Bereich Drehkolbengebläse ist wiederum breit gefächert. AERZEN liefert nicht nur Gebläse für Luft und neutrale Gase, sondern auch Prozessgasgebläse, Hochdruckgebläse, Vakuumgebläse, Vakuumpumpen und Biogasgebläse.
In addition to screw compressors, rotary lobe compressors and turbo blowers, positive displacement blowers are among the most important product groups. The product range in the area of positive displacement blowers is also wide-ranging. AERZEN The company supplies blowers for air and inert gases but also process gas blowers, high-pressure blowers, vacuum blowers, vacuum pumps and biogas blowers.
  AERZEN in der Prozessga...  
Die Aggregate eignen sich besonders für die Förderung und Komprimierung von Gasen mit leichtem Molekulargewicht und schwankender Zusammensetzung, wie neutrale und brennbare Gase, ölverträgliche Misch- und Prozessgase, Erd- oder Inertgase sowie alle gängigen Kältemittel.
The assemblies are particularly suited to the handling and compression of gases with light molecular weights and fluctuating compositions, such as inert and combustible gases, oil-consistent mixed and process gases, natural or inert gases as well as all standard coolants.
  Ölfreie Schraubenverdic...  
Das Aggregat ist hervorragend geeignet für die trockene Verdichtung aller Gase, die in der chemischen und petrochemischen Industrie vorkommen. Innerhalb der Verdichtungsräume findet keine metallische Berührung sowohl zwischen den beiden Rotoren als auch gegenüber dem Gehäuse statt.
The unit is ideally suited for dry compression of all gases, which occur in chemical and petrochemical industries. Within the compression chambers there is no metallic contact among both rotors as well as to the casing. Thanks to synchronising gears the rotors run without contact to each other. Therefore, the conveying chambers remain unlubricated and the conveyed medium will not be contaminated.
  Produktübersicht Drehko...  
Die hochentwickelten Maschinen stehen in verschiedensten Bauformen, Größen und Sonderausführungen zur Verfügung. Für die Förderung von Luft, Sauerstoff, von neutralen, aggressiven oder toxischen Gasen – senkrecht oder waagrecht.
AERZEN offers a wide range of products in the field of compression technology, possibly the widest that you will find anywhere. The highly-developed machines are available in a wide range of designs, sizes and special models; for conveying air, oxygen, neutral, aggressive or toxic gases; with vertical or horizontal flow; in negative pressure, positive pressure or vacuum modes. They can be used anywhere in the world where gas needs to be conveyed and compressed, and anywhere where reliable availability, energy efficiency and oilfree supply are the decisive factors.
  Schraubenverdichter Del...  
Förderung und Verdichtung neutraler Gase
Aeration of sewage tanks
  AERZEN Vakuumtechnik is...  
in der Bauform HM für neutrale Gase
in type of construction HM for neutral gases
  Schraubenverdichter Del...  
Förderung und Verdichtung neutraler Gase bzw. von Sondergasen
Pneumatic transport (using air or nitrogen) of powder, pellets, ashes, etc.
  Gebläse-Aggregate Delta...  
Drehkolbengebläse für Luft und neutrale Gase
Rotary lobe blowers for air and neutral gases
  Produktübersicht - AERZ...  
Luft , Neutrale Gase
air , neutral gases
  Ölfreie Schraubenverdic...  
Luft , Neutrale Gase , Prozessgase , Aggressive Gase
air , neutral gases , process gases , aggressive gases
  AERZEN Vakuumtechnik is...  
in der Bauform CM für aggressive Gase
in type of construction CM for corrosive gases
  Spaltrohrgebläse - AERZ...  
Neutrale oder agressive Gase? Aerzen bietet für beides eine Lösung - und dazu noch die passende Größe.
Neutral or aggressive gases? Aerzen offers solutions for both – as well as the appropriate size!
  Ölfreie Schraubenverdic...  
Luft , Neutrale Gase , Prozessgase , Aggressive Gase
air , neutral gases , process gases , aggressive gases
  Schraubenverdichter Del...  
Luft , Neutrale Gase , Aggressive Gase
air , neutral gases , aggressive gases
  Schraubenverdichter Del...  
Luft , Neutrale Gase , Aggressive Gase
air , neutral gases , aggressive gases
  Spaltrohrgebläse - AERZ...  
Ausführung CM für aggressive Gase:
CM version for aggressive gases:
  Das Unternehmen - AERZE...  
Gebläse für Luft und Neutrale Gase
Blowers for air and neutral gases
  AERZEN in der Prozessga...  
Das Prozessgasgebläse Baureihe GR fördert und verdichtet u.a. Wasserstoff, Methan und Kohlenstoffmonoxid-Mischgas, Wasserdampf und toxische Gase mit Ansaugtemperaturen von bis zu -40° C. Sein Ansaugvolumen beträgt 100 bis 50.000 m3/h.
The GR process gas blower series conveys and compresses, amongst others, hydrogen, methane and carbon monoxide mixed gas, water vapour and toxic gases with intake temperatures of up to -40° C. Its intake volume amounts to between 100 and 50,000 m3/h. The pressure range lies between -500 mbar and 5,000 mbar. The differential pressure amounts to a maximum of 1,500 mbar. The direction of flow of the blower is vertical.
  Ölfreie Schraubenverdic...  
AERZEN Prozessgas-Schraubenverdichter VRa ist hervorragend geeignet für die trockene Verdichtung aller Gase, die in der chemischen und petrochemischen Industrie vorkommen. Aber nicht nur in der chemischen Industrie sondern auch in anderen Industriezweigen werden AERZEN Prozeßgasschrauben in Steuerluftanlagen, Industriekälteanlagen, Verdampfungsanlagen, Bergbau und in Hüttenbetrieben eingesetzt.
Not only in the chemical industry, but also in other industry branches, AERZEN process gas screw compressors are applied in control air systems, industrial refrigeration plants, evaporation plants, mining industry and in iron and steel works. Practically all gases can be compressed, such as ammonia, argon, ethylene, acetylene, butadene, hydrochloric gas, natural gas, flare gas, blast furnace gas, marsh gas, helium, lime-kiln, coke oven, carbon monoxide, all hydrocarbon combinations, methane, propane, propylene, flue gas, crude gas, sulphur dioxide, nitrogen monoxide, nitrogen, styrene, vinylchloride and hydrogen gas.
  Drehkolbengebläse von A...  
Zur Schmierung kann Mineralöl oder Fomblinöl verwendet werden. Die Baureihe CM für aggressive Gase ist in 14 Baugrößen für theoretische Nennansaugvolumenströme von 110 bis 15.340 m³/h erhältlich. Die Baureihe HM für neutrale Gase hingegen umfasst neun Baugrößen für theoretische Nennansaugvolumenströme von 406 bis 15.570 m³/h.
The AERZEN CM and HM series canned blowers are designed for 24-hour operation, are certified for ATEX zone 0 (internal) and cover the high vacuum range from 200 to 10-5 mbar. Mineral or Fomblin oil can be used for lubrication. The CM series for aggressive gases is available in 14 output sizes for theoretical nominal intake flow rates from 110 to 15,340 m³/h. The HM Series for neutral gases, however, consists of 9 output sizes for theoretical nominal intake flow rates from 406 to 15,570 m³/h.The systems are suitable for creating a vacuum for industrial applications including chemical and process engineering, plastic film and glass coating, evacuation of hydrogen in helium leak detection systems and wherever leakage must be avoided. They are also well proven in the semiconductor and microelectronics industries, in the manufacture of flat panel displays, as well as in laser and solar technology.
1 2 3 Arrow