dao – Übersetzung – Keybot-Wörterbuch

Spacer TTN Translation Network TTN TTN Login Français English Spacer Help
Ausgangssprachen Zielsprachen
Keybot 436 Ergebnisse  www.maximintegrated.com
  Evaluating the DS28E05 ...  
Figure 3. The DS28E05 EV kit software: main window Setup tab.
The software window contains a menu at the top as seen in Figure 3. The log can be copied to the clipboard through the File
  Flow Meters - Maxim  
Order EV Kit ›
EVキットのご注文はこちら ›
基于MAX35103的流量计:
  Glossary Definition for...  
Glossary Term: EV
電気/電子用語:EV
术语表:EV
  Glossary Definition for...  
Glossary Term: EV Kit
電気/電子用語:EV Kit
术语表:EV kit (EV Kit)
  Glossary Definition for...  
Maxim > Glossary of EE Terms > EV Kit
マキシム > 電気/電子用語集 > EV Kit
Maxim > 电子工程术语表 > EV kit
  Glossary Definition for...  
Glossary Definition for EV Kit
電気/電子用語の定義:EV Kit
电子工程术语定义:EV kit
  Supplemental EV Kit Sof...  
Maxim > Design > Design Tools > Applications Software > Supplemental EV Kit Software
マキシム > 設計 > 設計ツール > アプリケーションソフトウェア > 補足EVキットソフトウェア
  Applications Software -...  
EV Kit Software
EVキットソフトウェア
评估板软件
  Glossary Definition for...  
Maxim > Glossary of EE Terms > EV
マキシム > 電気/電子用語集 > EV
Maxim > 电子工程术语表 > EV
  Glossary Definition for...  
Glossary Definition for EV
電気/電子用語の定義:EV
  Arrhenius/FIT Rate Calc...  
kT1 (eV)
使用温度(℃)
使用温度(°C)
  Glossary Definition for...  
EV Kit
EV kit
  Applications Software -...  
Drivers, firmware, and software for Maxim EV kits
マキシムEVキット用のドライバ、ファームウェア、およびソフトウェア
  Evaluating the DS28E05 ...  
The default setting for the EV kit software is Match-ROM in the ROM Selection Method drop-down list. Also, the Use Search-ROM to find first available EVKit device is checked by default. Leave these default selections for quick setup.
Once the adapter/port has successfully been opened, the Device Selection drop-down list is automatically populated with the unique ROM ID of the available DS28E05s. If no device is found on the 1-Wire, the selection is blank. In that case, insert the device and click the Refresh Selection button. A device must be present in order to proceed to the Memory tab to exercise the device.
  iButton Software Resour...  
EV Powertrain
EVパワートレイン
通信
  Automotive "V" Flow Dri...  
EV Powertrain
通信
  Evaluating the DS28E05 ...  
Figure 1. The DS9120P EV board with RJ11 cable.
Figure 2. The DS9481R-3C7 1-Wire USB adapter with cable.
  Evaluating the DS28E05 ...  
Connect the EV board to the DS9481R-3C7 1-Wire adapter with the RJ11 cable.
Wait to insert the DS9481R-3C7 into the PC until prompted by the software installation.
  Evaluating the DS28E05 ...  
DS9120P+ EV board with RJ11 cable
DS9481R-3C7+ 1-Wire USB adapter with cable*
  Evaluating the DS28E05 ...  
DS9120P EV board with RJ11 cable
DS28E05 in a TSOC package
  Evaluating the DS28E05 ...  
Insert the DS28E05 in the TSOC socket on the DS9120P EV board.
Connect the EV board to the DS9481R-3C7 1-Wire adapter with the RJ11 cable.
  Glossary Definition for...  
2. Evaluation, as in "EV Kit."
2. 評価(Evaluation)、例:EVキット
  Arrhenius/FIT Rate Calc...  
kT2 (eV)
試験温度(℃)
测试温度(°C)
  Arrhenius/FIT Rate Calc...  
Ea (eV)
故障数
失效
  Arrhenius/FIT Rate Calc...  
Ea (eV): Enter the Ea information.
Ea (eV): Ea情報を入力。
  Arrhenius/FIT Rate Calc...  
kT1 (eV): This is a calculated field.
kT1 (eV): 計算結果が表示されます。
  Arrhenius/FIT Rate Calc...  
kT2 (eV): This is a calculated field.
kT2 (eV): 計算結果が表示されます。
  MAX110EVKIT Evaluation ...  
The MAX110 EV kit and EV system evaluate both the MAX110 and MAX111. To evaluate the MAX111, order a free sample of the MAX111 along with the MAX110 EV kit.
MAX110のEVキットおよびEVシステムでは、MAX110およびMAX111の両方を評価することができます。MAX111を評価するためには、MAX110のEVキットとともにMAX111の無料サンプルを請求してください。
  CMAXQUSB Evaluates: SPI...  
Provides 2.5V, 3.3V, or 5V to EV Kit
2.5V、3.3V、または5VをEVキットに供給
为评估板提供2.5V、3.3V、5V电压
  CMAXQUSB Evaluates: SPI...  
An EV system is an EV kit combined with an interface board such as a CMAXQUSB and custom software. Refer to the appropriate EV kit data sheet for quick start and detailed operating instructions.
EVシステムは、CMAXQUSBなどのインタフェースボードとカスタムソフトウェアを組み合わせたEVキットです。クイックスタートと詳細な操作方法については、該当するEVキットデータシートを参照してください。
  MAX110EVKIT Evaluation ...  
The MAX110 EV kit and EV system evaluate both the MAX110 and MAX111. To evaluate the MAX111, order a free sample of the MAX111 along with the MAX110 EV kit.
MAX110のEVキットおよびEVシステムでは、MAX110およびMAX111の両方を評価することができます。MAX111を評価するためには、MAX110のEVキットとともにMAX111の無料サンプルを請求してください。
  MAX110EVKIT Evaluation ...  
The MAX110 EV kit and EV system evaluate both the MAX110 and MAX111. To evaluate the MAX111, order a free sample of the MAX111 along with the MAX110 EV kit.
MAX110のEVキットおよびEVシステムでは、MAX110およびMAX111の両方を評価することができます。MAX111を評価するためには、MAX110のEVキットとともにMAX111の無料サンプルを請求してください。
  CMAXQUSB Evaluates: SPI...  
An EV system is an EV kit combined with an interface board such as a CMAXQUSB and custom software. Refer to the appropriate EV kit data sheet for quick start and detailed operating instructions.
EVシステムは、CMAXQUSBなどのインタフェースボードとカスタムソフトウェアを組み合わせたEVキットです。クイックスタートと詳細な操作方法については、該当するEVキットデータシートを参照してください。
  CMAXQUSB Evaluates: SPI...  
The use of the CMAXQUSB as a MAXQ2000 development target is not supported. Rather, use the MAXQ2000 EV kit (available at www.maximintegrated.com/MAXQ2000-KIT) for this purpose.
CMAXQUSBをMAXQ2000の開発対象として用いることはサポートされていません。この目的のためには、MAXQ2000のEVキット(www.maximintegrated.com/MAXQ2000-KITで入手可能)を使用してください。
  MAX54XEVKIT Evaluation ...  
The EV kit provides an on-board +2.5V high-precision voltage reference (MAX6126). The EV kit also provides precision bipolar and ultra-precision unipolar op amps, the MAX9632 (single) and MAX44251 (dual), respectively.
このEVキットは、+2.5V高精度電圧リファレンス(MAX6126)を実装しています。また、このEVキットは、高精度バイポーラおよび超高精度ユニポーラオペアンプも備えており、それぞれMAX9632 (シングル)とMAX44251 (デュアル)です。
  MAX54XEVKIT Evaluation ...  
The EV kit comes with the MAX541AESA+ and a MAX542AESD+ installed; however, it can also be used to evaluate other parts in the same family. Contact the factory for free samples of the pin-compatible devices shown in Table 1 in the full data sheet.
このEVキットは、MAX541AESA+とMAX542AESD+が実装されていますが、同じファミリの他の製品の評価にも使用することができます。フルデータシートの表1に記載されたピンコンパチブルデバイスの無料サンプルについては、お問い合わせください。
  MAX54XEVKIT Evaluation ...  
The EV kit provides an on-board +2.5V high-precision voltage reference (MAX6126). The EV kit also provides precision bipolar and ultra-precision unipolar op amps, the MAX9632 (single) and MAX44251 (dual), respectively.
このEVキットは、+2.5V高精度電圧リファレンス(MAX6126)を実装しています。また、このEVキットは、高精度バイポーラおよび超高精度ユニポーラオペアンプも備えており、それぞれMAX9632 (シングル)とMAX44251 (デュアル)です。
  MAX147XXEVKIT Evaluatio...  
The EV kit comes with a MAX14759 single channel switch installed on U1. This EV kit can also be used to evaluate the MAX14760–MAX14764.
このEVキットは、シングルチャネルスイッチのMAX14759がU1に実装されています。このEVキットはMAX14760~MAX14764の評価にも使用することができます。
  CMAXQUSB Evaluates: SPI...  
An EV system is an EV kit combined with an interface board such as a CMAXQUSB and custom software. Refer to the appropriate EV kit data sheet for quick start and detailed operating instructions.
EVシステムは、CMAXQUSBなどのインタフェースボードとカスタムソフトウェアを組み合わせたEVキットです。クイックスタートと詳細な操作方法については、該当するEVキットデータシートを参照してください。
  MAX147XXEVKIT Evaluatio...  
The EV kit comes with a MAX14759 single channel switch installed on U1. This EV kit can also be used to evaluate the MAX14760–MAX14764.
このEVキットは、シングルチャネルスイッチのMAX14759がU1に実装されています。このEVキットはMAX14760~MAX14764の評価にも使用することができます。
  MAX109EVKIT Evaluation ...  
The MAX109 evaluation kit (EV kit) is a fully assembled and tested PCB that contains all the components necessary to evaluate the performance of the MAX109 8-bit, 2.2Gsps analog-to-digital converter (ADC) with track/hold amplifier and 1:4 demultiplexed LVDS outputs.
MAX109の評価キット(EVキット)は、トラック/ホールドアンプおよび1:4デマルチプレクサによるLVDS出力を備えた8ビット、2.2Gsps、アナログ-ディジタルコンバータ(ADC)のMAX109の性能を評価するために必要とされるすべての部品を搭載した完全実装および試験済みPCBです。MAX109のEVキットのアナログおよびクロック入力信号は差動またはシングルエンドのいずれかが可能です。このEVキット回路は、ADCの制御入力を設定するコネクタを提供します。逆多重化されたADCのLVDSディジタル出力は、ユーザ提供の高速ロジックアナライザまたはデータ収集システムで取り込むことができます。ヒートシンクのファンモジュールが提供されており、MAX109のダイの温度制御およびコンバータのダイナミック性能をさらに改善します。
  Year in Review - Maxim  
Making cars fun again. New developments* in safety systems, infotainment, Keyless Go, and EV battery management are revolutionizing the driving experience.
創造性の促進:プログラマブルアナログを夢から現実にするためにマキシムが取り組んでいるPIXI™技術の最初の製品として、世界初の完全にコンフィギュラブルな20ポートミックスドシグナル入出力デバイスを発表しました。
展示影响力。我们很荣幸被福布斯(Forbes)评选为“最值得信赖公司”之一,以及被《首席执行官》(Chief Executive)杂志评选为“最佳领导力公司”之一,在美国《新闻周刊》(Newsweek)的美国最环保企业中排名第108位。
  MAXQ615-KIT Evaluation ...  
Models that have been used in the past include CUI Inc. model DPR050030-P6P-SZ and V Infinity model EPS050100-P6P. If the EV kit is powered through the USB-to-JTAG adapter (through the 5V supply provided on the JTAG cable), then this power supply is not needed.
(オプション) 2.5mmジャックを備えた+5V安定化250mA (min)容量、センターポスト正電源。過去に使用されたモデルにはCUI Inc.のモデルDPR050030-P6P-SZとV InfinityモデルEPS050100-P6Pが含まれます。EVキットがUSB-JTAGアダプタ(JTAGケーブルで供給される5V電源)から給電される場合はこの電源は不要です。
  USB2PMB1 Adapter Board ...  
Ordering information for EV systems is included in the EV kits’ corresponding data sheet. An EV system is an EV kit combined with an interface board such as a USB2PMB1# and custom software. Refer to the appropriate EV kit data sheet for quick start and detailed operating instructions.
EVシステムの型番は、EVキットの対応するデータシートに記載されています。EVシステムは、EVキットとUSB2PMB1#などのインタフェースボードおよびカスタムソフトウェアの組み合わせです。クイックスタートおよび詳細な操作手順については、適切なEVキットのデータシートを参照してください。USB2PMB1#は、Windows® 7、Windows 8、およびWindows XP®上で試験済みです。
  CMAXQUSB Evaluates: SPI...  
The Maxim Command Module (CMAXQUSB) receives commands from an IBM PC through the USB to create an SPI™ or SMBus™/I²C-compatible interface. Maxim evaluation kits (EV kits) that make use of the CMAXQUSB require custom software and can be ordered together as an evaluation system (EV system).
マキシムコマンドモジュール(CMAXQUSB)はUSBを経由してIBM PCからコマンドを受け取り、SPI™またはSMBus™/I²C対応のインタフェースを構築します。CMAXQUSBを利用するマキシム評価キット(EVキット)にはカスタムソフトウェアが必要で、評価システム(EVシステム)としてEVキットと合わせて注文することができます。EVシステムの型番は、EVキットの対応データシートに記載されています。
  USB2PMB1 Adapter Board ...  
Ordering information for EV systems is included in the EV kits’ corresponding data sheet. An EV system is an EV kit combined with an interface board such as a USB2PMB1# and custom software. Refer to the appropriate EV kit data sheet for quick start and detailed operating instructions.
EVシステムの型番は、EVキットの対応するデータシートに記載されています。EVシステムは、EVキットとUSB2PMB1#などのインタフェースボードおよびカスタムソフトウェアの組み合わせです。クイックスタートおよび詳細な操作手順については、適切なEVキットのデータシートを参照してください。USB2PMB1#は、Windows® 7、Windows 8、およびWindows XP®上で試験済みです。
  MAX54XEVKIT Evaluation ...  
The MAX54X evaluation kit (EV kit) provides a proven design to evaluate the MAX541/MAX542 serial-input, voltage-output, 16-bit digital-to-analog convertors (DACs). The EV kit also includes Windows XP®-, Windows Vista®-, and Windows® 7-compatible software that provides a simple graphical user interface (GUI) for exercising the features of these devices.
MAX54Xの評価キット(EVキット)は、シリアル入力、電圧出力、16ビットデジタル-アナログコンバータ(DAC)のMAX541/MAX542を評価する実証済みデザインを提供します。このEVキットは、Windows XP®、Windows Vista®、およびWindows® 7対応のソフトウェアも備え、これらのデバイスの各機能を実行するためのシンプルなグラフィカルユーザーインタフェース(GUI)を提供します。
  MAX147XXEVKIT Evaluatio...  
The MAX147xx evaluation kit (EV kit) is a fully assembled and tested circuit board for evaluating the MAX14759 and MAX14760 family of beyond-the-rail switches. The EV kit features footprints for both 8-pin and 10-pin TDFN surface-mount packages to evaluate any part in the switch family.
MAX147xxの評価キット(EVキット)は、Beyond-the-RailsスイッチのMAX14759およびMAX14760ファミリを評価するための完全実装および試験済みの回路基板です。このEVキットは8ピンと10ピンの両方のTDFN表面実装パッケージ用の実装パターンを備えているため、上記スイッチファミリの任意の製品を評価することができます。これらのスイッチは+3V~+5.5Vの単一電源で動作します。
  USB2PMB1 Adapter Board ...  
Ordering information for EV systems is included in the EV kits’ corresponding data sheet. An EV system is an EV kit combined with an interface board such as a USB2PMB1# and custom software. Refer to the appropriate EV kit data sheet for quick start and detailed operating instructions.
EVシステムの型番は、EVキットの対応するデータシートに記載されています。EVシステムは、EVキットとUSB2PMB1#などのインタフェースボードおよびカスタムソフトウェアの組み合わせです。クイックスタートおよび詳細な操作手順については、適切なEVキットのデータシートを参照してください。USB2PMB1#は、Windows® 7、Windows 8、およびWindows XP®上で試験済みです。
  MAX110EVKIT Evaluation ...  
The MAX110 evaluation system (EV system) is a complete, low-cost, two-channel data-acquisition system consisting of a MAX110 evaluation kit (EV kit) and a Maxim 80C32 microcontroller (µC) module. IBM® PC compatible software provides a handy user interface to command the MAX110's features.
MAX110の評価システム(EVシステム)は、MAX110の評価キット(EVキット)およびマキシムの80C32マイクロコントローラ(µC)モジュールから構成された、低コストの完全2チャネルデータ収集システムです。MAX110の機能を活用するための便利なユーザインタフェースとして、IBM® PCコンパチブルなソフトウェアを使用することができます。ソースコードは、C++およびCの両方で提供されています。デモ用ソフトには、ローリング平均フィルタおよびデータロギングアプリケーションが含まれます。MAX110のEVキットでは、1平方インチの試作品作製用領域が提供されます。
  USB2PMB1 Adapter Board ...  
Ordering information for EV systems is included in the EV kits’ corresponding data sheet. An EV system is an EV kit combined with an interface board such as a USB2PMB1# and custom software. Refer to the appropriate EV kit data sheet for quick start and detailed operating instructions.
EVシステムの型番は、EVキットの対応するデータシートに記載されています。EVシステムは、EVキットとUSB2PMB1#などのインタフェースボードおよびカスタムソフトウェアの組み合わせです。クイックスタートおよび詳細な操作手順については、適切なEVキットのデータシートを参照してください。USB2PMB1#は、Windows® 7、Windows 8、およびWindows XP®上で試験済みです。
  CMAXQUSB Evaluates: SPI...  
The Maxim Command Module (CMAXQUSB) receives commands from an IBM PC through the USB to create an SPI™ or SMBus™/I²C-compatible interface. Maxim evaluation kits (EV kits) that make use of the CMAXQUSB require custom software and can be ordered together as an evaluation system (EV system).
マキシムコマンドモジュール(CMAXQUSB)はUSBを経由してIBM PCからコマンドを受け取り、SPI™またはSMBus™/I²C対応のインタフェースを構築します。CMAXQUSBを利用するマキシム評価キット(EVキット)にはカスタムソフトウェアが必要で、評価システム(EVシステム)としてEVキットと合わせて注文することができます。EVシステムの型番は、EVキットの対応データシートに記載されています。
  MAX110EVKIT Evaluation ...  
The MAX110 evaluation system (EV system) is a complete, low-cost, two-channel data-acquisition system consisting of a MAX110 evaluation kit (EV kit) and a Maxim 80C32 microcontroller (µC) module. IBM® PC compatible software provides a handy user interface to command the MAX110's features.
MAX110の評価システム(EVシステム)は、MAX110の評価キット(EVキット)およびマキシムの80C32マイクロコントローラ(µC)モジュールから構成された、低コストの完全2チャネルデータ収集システムです。MAX110の機能を活用するための便利なユーザインタフェースとして、IBM® PCコンパチブルなソフトウェアを使用することができます。ソースコードは、C++およびCの両方で提供されています。デモ用ソフトには、ローリング平均フィルタおよびデータロギングアプリケーションが含まれます。MAX110のEVキットでは、1平方インチの試作品作製用領域が提供されます。
  USB2PMB1 Adapter Board ...  
The Maxim USB2PMB1# board requires custom software and can be ordered together as an evaluation system (EV system). The Munich design integrates a low-power, 1.2A, PWM step-down DC-DC converter (MAX1556); a dual, high-speed, USB-to-multipurpose UART/FIFO IC (FT2232HL); and a 4K MICROWIRE®-compatible serial EEPROM.
マキシムのUSB2PMB1#ボードにはカスタムソフトウェアが必要で、評価システム(EVシステム)として同時に注文することができます。Munichデザインは、低電力、1.2A、PWMステップダウンDC-DCコンバータ(MAX1556)、デュアル、高速、USB-汎用UART/FIFO IC (FT2232HL)、および4K MICROWIRE®対応シリアルEEPROMを内蔵しています。このMunichアダプタボードは、マキシムのCampbell、Santa Fe、Fresno、およびCoronaリファレンスデザインなどの、任意のPmod™対応プラグインペリフェラルモジュール用のUSB-SPIインタフェースを実現するために使用されます。
  MAX147XXEVKIT Evaluatio...  
The MAX147xx evaluation kit (EV kit) is a fully assembled and tested circuit board for evaluating the MAX14759 and MAX14760 family of beyond-the-rail switches. The EV kit features footprints for both 8-pin and 10-pin TDFN surface-mount packages to evaluate any part in the switch family.
MAX147xxの評価キット(EVキット)は、Beyond-the-RailsスイッチのMAX14759およびMAX14760ファミリを評価するための完全実装および試験済みの回路基板です。このEVキットは8ピンと10ピンの両方のTDFN表面実装パッケージ用の実装パターンを備えているため、上記スイッチファミリの任意の製品を評価することができます。これらのスイッチは+3V~+5.5Vの単一電源で動作します。
  MAX54XEVKIT Evaluation ...  
The MAX54X evaluation kit (EV kit) provides a proven design to evaluate the MAX541/MAX542 serial-input, voltage-output, 16-bit digital-to-analog convertors (DACs). The EV kit also includes Windows XP®-, Windows Vista®-, and Windows® 7-compatible software that provides a simple graphical user interface (GUI) for exercising the features of these devices.
MAX54Xの評価キット(EVキット)は、シリアル入力、電圧出力、16ビットデジタル-アナログコンバータ(DAC)のMAX541/MAX542を評価する実証済みデザインを提供します。このEVキットは、Windows XP®、Windows Vista®、およびWindows® 7対応のソフトウェアも備え、これらのデバイスの各機能を実行するためのシンプルなグラフィカルユーザーインタフェース(GUI)を提供します。
  USB2PMB1 Adapter Board ...  
Ordering information for EV systems is included in the EV kits’ corresponding data sheet. An EV system is an EV kit combined with an interface board such as a USB2PMB1# and custom software. Refer to the appropriate EV kit data sheet for quick start and detailed operating instructions.
EVシステムの型番は、EVキットの対応するデータシートに記載されています。EVシステムは、EVキットとUSB2PMB1#などのインタフェースボードおよびカスタムソフトウェアの組み合わせです。クイックスタートおよび詳細な操作手順については、適切なEVキットのデータシートを参照してください。USB2PMB1#は、Windows® 7、Windows 8、およびWindows XP®上で試験済みです。
  REP015: Dual-Path CDMA ...  
This performance is fairly deep into linear mode, as the lowered PAE of 28% reflects. Typically, the part would be tuned for better than 33% efficiency and at least -44dBc ACPR1. The EV board was used for these tests.
狭帯域CDMAで以下の性能を満足するよう、高電力パワーアンプMAX2264の経路を特性化してチューニングしました。すなわち、+28dBmのPoutで、26.8dBの利得、28%の効率、ACPR1 = -48.5dBc、およびACPR2 = -59.0dBcを得るというものです。28%という低いPAEが示すように、この動作はかなり深いリニアモードです。通常、MAX2264は33%以上の効率と少なくとも-44dBcのACPR1が得られるようにチューニングされます。これらのテストには評価ボードを使用しました。
  MAXQUSBJTAGOW-KIT MAXQ ...  
The MAXQ® USB-to-JTAG/1-Wire® adapter is a convenient way to interface either the JTAG or 1-Wire port on MAXQ microcontrollers to a PC. The EV kit can be used with compatible software tools running on a host PC to load and debug code on programmable MAXQ microcontrollers.
MAXQ® USB-JTAG/1-Wire®アダプタは、MAXQマイクロコントローラのJTAGまたは1-WireポートとPCとのインタフェースを行うための簡便な方法です。EVキットをホストPC上の対応ソフトウェアツールとともに使用して、プログラム可能MAXQマイクロコントローラのコードのロードおよびデバッグを行うことができます。EVキットには、MAXQ USB-JTAG/1-Wireアダプタ、インタフェースケーブル、およびUSBミニBケーブルが含まれています。
  MAXQUSBJTAGOW-KIT MAXQ ...  
The MAXQ® USB-to-JTAG/1-Wire® adapter is a convenient way to interface either the JTAG or 1-Wire port on MAXQ microcontrollers to a PC. The EV kit can be used with compatible software tools running on a host PC to load and debug code on programmable MAXQ microcontrollers.
MAXQ® USB-JTAG/1-Wire®アダプタは、MAXQマイクロコントローラのJTAGまたは1-WireポートとPCとのインタフェースを行うための簡便な方法です。EVキットをホストPC上の対応ソフトウェアツールとともに使用して、プログラム可能MAXQマイクロコントローラのコードのロードおよびデバッグを行うことができます。EVキットには、MAXQ USB-JTAG/1-Wireアダプタ、インタフェースケーブル、およびUSBミニBケーブルが含まれています。
  Wasp: The Buzz on Weara...  
Request EV kit ›
EVキットのご請求 ›
购买评估板 ›
  Wasp: The Buzz on Weara...  
Wasp EV kits are now available.
Wasp EVキットは現在入手可能
  PIXI MAX11300 4-20mA Cu...  
2. MAX11300 EV Kit
4. An amp-meter
  LED Drivers: PoE Lighti...  
Buy EV Kit ›
EVキットのご注文
定购评估板
  CMAXQUSB Evaluates: SPI...  
The Maxim Command Module (CMAXQUSB) receives commands from an IBM PC through the USB to create an SPI™ or SMBus™/I²C-compatible interface. Maxim evaluation kits (EV kits) that make use of the CMAXQUSB require custom software and can be ordered together as an evaluation system (EV system).
マキシムコマンドモジュール(CMAXQUSB)はUSBを経由してIBM PCからコマンドを受け取り、SPI™またはSMBus™/I²C対応のインタフェースを構築します。CMAXQUSBを利用するマキシム評価キット(EVキット)にはカスタムソフトウェアが必要で、評価システム(EVシステム)としてEVキットと合わせて注文することができます。EVシステムの型番は、EVキットの対応データシートに記載されています。
  CMAXQUSB Evaluates: SPI...  
The Maxim Command Module (CMAXQUSB) receives commands from an IBM PC through the USB to create an SPI™ or SMBus™/I²C-compatible interface. Maxim evaluation kits (EV kits) that make use of the CMAXQUSB require custom software and can be ordered together as an evaluation system (EV system).
マキシムコマンドモジュール(CMAXQUSB)はUSBを経由してIBM PCからコマンドを受け取り、SPI™またはSMBus™/I²C対応のインタフェースを構築します。CMAXQUSBを利用するマキシム評価キット(EVキット)にはカスタムソフトウェアが必要で、評価システム(EVシステム)としてEVキットと合わせて注文することができます。EVシステムの型番は、EVキットの対応データシートに記載されています。
  MAXSANTAFEEVSYS Evaluat...  
EV Kit Contents
EVキットの内容
USB2PMB1 USB至Pmod™ 2A适配器电路板
  Current Calibration Pro...  
Refer to the InTune EV kit data sheet for detailed instructions on setting up the EV kit. This current-calibration procedure requires an accurate load current measurement, which can be accomplished by using one of the following three methods:
If using discrete load resistors, the load current can be calculated by measuring the voltage across the resistor and dividing by the resistor value. Typical resistor values used for these load currents are not very accurate and may have a large temperature coefficient that further affects the current measurement’s accuracy.
  Using the Serial Port o...  
Connect the serial cable from COM1 on the PC to plug J1 on the MAXQ610 EV kit board.
MAX-IDEを使用してデモ用コードをコンパイルして、MAXQ610のEVキットにロードした後は、以下のようにして実行することができます。
使用MAX-IDE对演示程序进行编译,装入到MAXQ610评估套件中后,可以按以下步骤执行它。
  MAX109EVKIT Evaluation ...  
The MAX109 evaluation kit (EV kit) is a fully assembled and tested PCB that contains all the components necessary to evaluate the performance of the MAX109 8-bit, 2.2Gsps analog-to-digital converter (ADC) with track/hold amplifier and 1:4 demultiplexed LVDS outputs.
MAX109の評価キット(EVキット)は、トラック/ホールドアンプおよび1:4デマルチプレクサによるLVDS出力を備えた8ビット、2.2Gsps、アナログ-ディジタルコンバータ(ADC)のMAX109の性能を評価するために必要とされるすべての部品を搭載した完全実装および試験済みPCBです。MAX109のEVキットのアナログおよびクロック入力信号は差動またはシングルエンドのいずれかが可能です。このEVキット回路は、ADCの制御入力を設定するコネクタを提供します。逆多重化されたADCのLVDSディジタル出力は、ユーザ提供の高速ロジックアナライザまたはデータ収集システムで取り込むことができます。ヒートシンクのファンモジュールが提供されており、MAX109のダイの温度制御およびコンバータのダイナミック性能をさらに改善します。
  MAXQ622-KIT Evaluation ...  
The MAXQ622 evaluation kit (EV kit) provides a proven platform for conveniently evaluating the capabilities of the MAXQ622 low-power, 16-bit, RISC microcontroller with USB interface targeted for battery-powered applications.
MAXQ622の評価キット(EVキット)は、バッテリ駆動アプリケーション向け、USBインタフェースを備えた低電力16ビットRISCマイクロコントローラのMAXQ622の性能を容易に評価するための実証済みプラットフォームを提供します。このEVキットには、赤外線(IR)送信および受信デバイス、USB Mini-Bインタフェース、プロセッサのI/Oポートピンへのアクセスを提供するヘッダ、5V単一電源入力、およびユーザー入力用の8つのプッシュボタンスイッチの台を搭載したMAXQ622のEVキットボードが含まれます。付属のソフトウェア、USB-JTAGアダプタ、およびUSBケーブルをPCに接続することによって、このEVキットは、MAXQ622 RISCプロセッサの全体的な性能を評価するだけでなく、アプリケーションの開発やデバッキングにも最適な完全な機能的システムを提供します。
  MAXQ622-KIT Evaluation ...  
The MAXQ622 evaluation kit (EV kit) provides a proven platform for conveniently evaluating the capabilities of the MAXQ622 low-power, 16-bit, RISC microcontroller with USB interface targeted for battery-powered applications.
MAXQ622の評価キット(EVキット)は、バッテリ駆動アプリケーション向け、USBインタフェースを備えた低電力16ビットRISCマイクロコントローラのMAXQ622の性能を容易に評価するための実証済みプラットフォームを提供します。このEVキットには、赤外線(IR)送信および受信デバイス、USB Mini-Bインタフェース、プロセッサのI/Oポートピンへのアクセスを提供するヘッダ、5V単一電源入力、およびユーザー入力用の8つのプッシュボタンスイッチの台を搭載したMAXQ622のEVキットボードが含まれます。付属のソフトウェア、USB-JTAGアダプタ、およびUSBケーブルをPCに接続することによって、このEVキットは、MAXQ622 RISCプロセッサの全体的な性能を評価するだけでなく、アプリケーションの開発やデバッキングにも最適な完全な機能的システムを提供します。
  MAXQ622-KIT Evaluation ...  
The MAXQ622 evaluation kit (EV kit) provides a proven platform for conveniently evaluating the capabilities of the MAXQ622 low-power, 16-bit, RISC microcontroller with USB interface targeted for battery-powered applications.
MAXQ622の評価キット(EVキット)は、バッテリ駆動アプリケーション向け、USBインタフェースを備えた低電力16ビットRISCマイクロコントローラのMAXQ622の性能を容易に評価するための実証済みプラットフォームを提供します。このEVキットには、赤外線(IR)送信および受信デバイス、USB Mini-Bインタフェース、プロセッサのI/Oポートピンへのアクセスを提供するヘッダ、5V単一電源入力、およびユーザー入力用の8つのプッシュボタンスイッチの台を搭載したMAXQ622のEVキットボードが含まれます。付属のソフトウェア、USB-JTAGアダプタ、およびUSBケーブルをPCに接続することによって、このEVキットは、MAXQ622 RISCプロセッサの全体的な性能を評価するだけでなく、アプリケーションの開発やデバッキングにも最適な完全な機能的システムを提供します。
  MAX109EVKIT Evaluation ...  
The MAX109 evaluation kit (EV kit) is a fully assembled and tested PCB that contains all the components necessary to evaluate the performance of the MAX109 8-bit, 2.2Gsps analog-to-digital converter (ADC) with track/hold amplifier and 1:4 demultiplexed LVDS outputs.
MAX109の評価キット(EVキット)は、トラック/ホールドアンプおよび1:4デマルチプレクサによるLVDS出力を備えた8ビット、2.2Gsps、アナログ-ディジタルコンバータ(ADC)のMAX109の性能を評価するために必要とされるすべての部品を搭載した完全実装および試験済みPCBです。MAX109のEVキットのアナログおよびクロック入力信号は差動またはシングルエンドのいずれかが可能です。このEVキット回路は、ADCの制御入力を設定するコネクタを提供します。逆多重化されたADCのLVDSディジタル出力は、ユーザ提供の高速ロジックアナライザまたはデータ収集システムで取り込むことができます。ヒートシンクのファンモジュールが提供されており、MAX109のダイの温度制御およびコンバータのダイナミック性能をさらに改善します。
  MAXQUSBJTAG-KIT Evaluat...  
The MAXQ® USB-to-JTAG evaluation kit (EV kit) is a preprogrammed interface board that acts as a USB-to-JTAG programming and debugging adapter for MAXQ microcontrollers. With the included board, included 10-pin JTAG interface cable, and a (user supplied) standard A-to-Mini-B USB cable, the EV kit can be used with compatible software tools running on a host PC to load and debug code on programmable MAXQ microcontrollers.
MAXQ® USB-JTAG評価キット(EVキット)は事前設定されたインタフェースボードで、MAXQマイクロコントローラ用のUSB-JTAGプログラミングおよびデバッグアダプタとして動作します。このEVキットは、同梱されたボードと10ピンJTAGインタフェースケーブル、および(ユーザが用意する)標準A-Mini-B USBケーブルを使って、ホストPCで動作するコンパチブルのソフトウェアツールとともに、プログラマブルなMAXQマイクロコントローラのコードをロードおよびデバッグすることができます。USB-JTAGアダプタをサポートするソフトウェアパッケージには、Cプログラミング用のIAR Embedded Workbench® IDE、アセンブリベースのプロジェクト用のマキシムの無償MAX-IDE、および事前にコンパイルされたIntelの16進数形式ファイルをロードし検証するためのマイクロコントローラのツールキット(MTK)が含まれています。
  MAXQ615-KIT Evaluation ...  
The MAXQ615 evaluation kit (EV kit) provides a proven platform for conveniently evaluating the capabilities of the MAXQ615 low-power, 16-bit, RISC microcontroller targeted for battery-powered applications.
MAXQ615の評価キット(EVキット)は、バッテリ駆動アプリケーション向け、低電力16ビットRISCマイクロコントローラのMAXQ615の性能を容易に評価するための実証済みプラットフォームを提供します。このEVキットは、MAXQ615のEVキットボード、サンプルソフトウェア、USB-JTAGインタフェースボード、10ピンJTAGインタフェースケーブル、およびPC接続用の標準A-ミニB USBケーブルを備えています。EVキットボードは、プロセッサのI/Oポートピンへのアクセスを提供するピンヘッダ、5V電源入力、ユーザー入力用プッシュボタンスイッチや、検証用のSPI ADCおよびI²C温度センサーを提供します。このEVキットは、RISCプロセッサのMAXQ615の全体的な性能を評価するだけでなく、アプリケーションの開発やデバッグにも最適な機能完備のシステムを提供します。
  MAXQ622-KIT Evaluation ...  
The MAXQ622 evaluation kit (EV kit) provides a proven platform for conveniently evaluating the capabilities of the MAXQ622 low-power, 16-bit, RISC microcontroller with USB interface targeted for battery-powered applications.
MAXQ622の評価キット(EVキット)は、バッテリ駆動アプリケーション向け、USBインタフェースを備えた低電力16ビットRISCマイクロコントローラのMAXQ622の性能を容易に評価するための実証済みプラットフォームを提供します。このEVキットには、赤外線(IR)送信および受信デバイス、USB Mini-Bインタフェース、プロセッサのI/Oポートピンへのアクセスを提供するヘッダ、5V単一電源入力、およびユーザー入力用の8つのプッシュボタンスイッチの台を搭載したMAXQ622のEVキットボードが含まれます。付属のソフトウェア、USB-JTAGアダプタ、およびUSBケーブルをPCに接続することによって、このEVキットは、MAXQ622 RISCプロセッサの全体的な性能を評価するだけでなく、アプリケーションの開発やデバッキングにも最適な完全な機能的システムを提供します。
  MAXQ615-KIT Evaluation ...  
The MAXQ615 evaluation kit (EV kit) provides a proven platform for conveniently evaluating the capabilities of the MAXQ615 low-power, 16-bit, RISC microcontroller targeted for battery-powered applications.
MAXQ615の評価キット(EVキット)は、バッテリ駆動アプリケーション向け、低電力16ビットRISCマイクロコントローラのMAXQ615の性能を容易に評価するための実証済みプラットフォームを提供します。このEVキットは、MAXQ615のEVキットボード、サンプルソフトウェア、USB-JTAGインタフェースボード、10ピンJTAGインタフェースケーブル、およびPC接続用の標準A-ミニB USBケーブルを備えています。EVキットボードは、プロセッサのI/Oポートピンへのアクセスを提供するピンヘッダ、5V電源入力、ユーザー入力用プッシュボタンスイッチや、検証用のSPI ADCおよびI²C温度センサーを提供します。このEVキットは、RISCプロセッサのMAXQ615の全体的な性能を評価するだけでなく、アプリケーションの開発やデバッグにも最適な機能完備のシステムを提供します。
  Thermoelectric Cooler C...  
3.3V for the EV board
Connections:
  Thermoelectric Cooler C...  
Power on the DS4830 EV kit.
Testing the TEC control functionality:
  MAXQUSBJTAG-KIT Evaluat...  
The MAXQ® USB-to-JTAG evaluation kit (EV kit) is a preprogrammed interface board that acts as a USB-to-JTAG programming and debugging adapter for MAXQ microcontrollers. With the included board, included 10-pin JTAG interface cable, and a (user supplied) standard A-to-Mini-B USB cable, the EV kit can be used with compatible software tools running on a host PC to load and debug code on programmable MAXQ microcontrollers.
MAXQ® USB-JTAG評価キット(EVキット)は事前設定されたインタフェースボードで、MAXQマイクロコントローラ用のUSB-JTAGプログラミングおよびデバッグアダプタとして動作します。このEVキットは、同梱されたボードと10ピンJTAGインタフェースケーブル、および(ユーザが用意する)標準A-Mini-B USBケーブルを使って、ホストPCで動作するコンパチブルのソフトウェアツールとともに、プログラマブルなMAXQマイクロコントローラのコードをロードおよびデバッグすることができます。USB-JTAGアダプタをサポートするソフトウェアパッケージには、Cプログラミング用のIAR Embedded Workbench® IDE、アセンブリベースのプロジェクト用のマキシムの無償MAX-IDE、および事前にコンパイルされたIntelの16進数形式ファイルをロードし検証するためのマイクロコントローラのツールキット(MTK)が含まれています。
  MAXQ615-KIT Evaluation ...  
The MAXQ615 evaluation kit (EV kit) provides a proven platform for conveniently evaluating the capabilities of the MAXQ615 low-power, 16-bit, RISC microcontroller targeted for battery-powered applications.
MAXQ615の評価キット(EVキット)は、バッテリ駆動アプリケーション向け、低電力16ビットRISCマイクロコントローラのMAXQ615の性能を容易に評価するための実証済みプラットフォームを提供します。このEVキットは、MAXQ615のEVキットボード、サンプルソフトウェア、USB-JTAGインタフェースボード、10ピンJTAGインタフェースケーブル、およびPC接続用の標準A-ミニB USBケーブルを備えています。EVキットボードは、プロセッサのI/Oポートピンへのアクセスを提供するピンヘッダ、5V電源入力、ユーザー入力用プッシュボタンスイッチや、検証用のSPI ADCおよびI²C温度センサーを提供します。このEVキットは、RISCプロセッサのMAXQ615の全体的な性能を評価するだけでなく、アプリケーションの開発やデバッグにも最適な機能完備のシステムを提供します。
  MAX110EVKIT Evaluation ...  
The MAX110 evaluation system (EV system) is a complete, low-cost, two-channel data-acquisition system consisting of a MAX110 evaluation kit (EV kit) and a Maxim 80C32 microcontroller (µC) module. IBM® PC compatible software provides a handy user interface to command the MAX110's features.
MAX110の評価システム(EVシステム)は、MAX110の評価キット(EVキット)およびマキシムの80C32マイクロコントローラ(µC)モジュールから構成された、低コストの完全2チャネルデータ収集システムです。MAX110の機能を活用するための便利なユーザインタフェースとして、IBM® PCコンパチブルなソフトウェアを使用することができます。ソースコードは、C++およびCの両方で提供されています。デモ用ソフトには、ローリング平均フィルタおよびデータロギングアプリケーションが含まれます。MAX110のEVキットでは、1平方インチの試作品作製用領域が提供されます。
  USB Signaling and Power...  
EV kit available for MAX14636/37 USB charger detectors
USBチャージャ検出器のMAX14636/37に使用可能なEVキット
  Using the Serial Port o...  
Once the MAXQ610 EV kit board has been configured correctly, set up the hardware to compile and load the demonstration code.
以下のジャンパを接続してください(ピン1-2間):JH14、JH20、JH22、JH23、JH24、JH25、およびJH26。
  Using the Serial Port o...  
MAXQ610 EV kit board
デモ用コードを実行するためには、以下のハードウェアとソフトウェアが必要です。
需要下面的硬件和软件才能运行演示程序。
  LED Drivers: MR16 - Maxim  
Get your MAX16840 EV kit today. It comes with everything you'll need to evaluate your LED-driven MR16 lamp.
MAX16840のEVキットを提供しています。LED駆動のMR16ランプの評価に必要なものがすべて付属します。
  Using 2.5Gbps SerDes wi...  
Connect the USB cable from the PC to the MAX9259 EV kit.
Start | Programsメニューからアイコンを開いて、MAX9259/MAX9260のEVキットプログラムを起動します。EVキットソフトウェア設定ウィンドウが表示されます(図2)。
  Using 2.5Gbps SerDes wi...  
CDS = low; ECU attached to MAX9259; connect USB to MAX9259 EV kit
MS = low; half-duplex base mode; required when writing to device registers or when using an external I²C peripheral
  Using the Serial Port o...  
Connect the power cable to plug J3 on the MAXQ610 EV kit board.
電源をオフにして、JTAG、電源、およびシリアルの各ケーブルを抜いてください。
  Using 2.5Gbps SerDes wi...  
MAX9259 and MAX9260 EV kits
(アイダイアグラム解析用のオプション)
  MAXQ615-KIT Evaluation ...  
The MAXQ615 evaluation kit (EV kit) provides a proven platform for conveniently evaluating the capabilities of the MAXQ615 low-power, 16-bit, RISC microcontroller targeted for battery-powered applications.
MAXQ615の評価キット(EVキット)は、バッテリ駆動アプリケーション向け、低電力16ビットRISCマイクロコントローラのMAXQ615の性能を容易に評価するための実証済みプラットフォームを提供します。このEVキットは、MAXQ615のEVキットボード、サンプルソフトウェア、USB-JTAGインタフェースボード、10ピンJTAGインタフェースケーブル、およびPC接続用の標準A-ミニB USBケーブルを備えています。EVキットボードは、プロセッサのI/Oポートピンへのアクセスを提供するピンヘッダ、5V電源入力、ユーザー入力用プッシュボタンスイッチや、検証用のSPI ADCおよびI²C温度センサーを提供します。このEVキットは、RISCプロセッサのMAXQ615の全体的な性能を評価するだけでなく、アプリケーションの開発やデバッグにも最適な機能完備のシステムを提供します。
  MAXQ615-KIT Evaluation ...  
The MAXQ615 evaluation kit (EV kit) provides a proven platform for conveniently evaluating the capabilities of the MAXQ615 low-power, 16-bit, RISC microcontroller targeted for battery-powered applications.
MAXQ615の評価キット(EVキット)は、バッテリ駆動アプリケーション向け、低電力16ビットRISCマイクロコントローラのMAXQ615の性能を容易に評価するための実証済みプラットフォームを提供します。このEVキットは、MAXQ615のEVキットボード、サンプルソフトウェア、USB-JTAGインタフェースボード、10ピンJTAGインタフェースケーブル、およびPC接続用の標準A-ミニB USBケーブルを備えています。EVキットボードは、プロセッサのI/Oポートピンへのアクセスを提供するピンヘッダ、5V電源入力、ユーザー入力用プッシュボタンスイッチや、検証用のSPI ADCおよびI²C温度センサーを提供します。このEVキットは、RISCプロセッサのMAXQ615の全体的な性能を評価するだけでなく、アプリケーションの開発やデバッグにも最適な機能完備のシステムを提供します。
  Current Calibration Pro...  
Refer to the InTune EV kit data sheet for detailed instructions on setting up the EV kit. This current-calibration procedure requires an accurate load current measurement, which can be accomplished by using one of the following three methods:
If using discrete load resistors, the load current can be calculated by measuring the voltage across the resistor and dividing by the resistor value. Typical resistor values used for these load currents are not very accurate and may have a large temperature coefficient that further affects the current measurement’s accuracy.
  Thermoelectric Cooler C...  
Connect the thermistor signal of the TOSA to test point TECC_TEMP on the EV board.
Connect the set-point voltage to ADC_S14 (center pin of J7) on the EV board.
  Thermoelectric Cooler C...  
Connect TEC (+) of the TOSA to the R_TECC pad next to jumper LOADA on the EV board.
Connect the thermistor signal of the TOSA to test point TECC_TEMP on the EV board.
  Current Calibration Pro...  
Verify that the lab supply is configured for a voltage within the InTune EV kit’s absolute maximum limits before connecting and turning on the supply.
Do not exceed the current rating for the test leads used to connect VIN and VOUT.
  Reliability Monitor Pro...  
Ea = Activation Energy (e.g. 0.7 ev)
Ea = 活性化エネルギ(例:0.7ev)
  Using 2.5Gbps SerDes wi...  
Figure 2. MAX9259/60 EV kits software configuration window.
MAX9260タブシート(図4)から、8ビットエラーカウントレジスタ(0x0E)を読み出して、PRBSテスト前のエラーをクリアします。
  Using 2.5Gbps SerDes wi...  
Figure 3. MAX9259/MAX9260 EV kits software main window (MAX9259 tab).
PRBSセルフテストを任意のテスト時間のみ実行します。その後、まずMAX9260タブ、次にMAX9259タブの順でPRBSEN = 0 (0x04 D5)を設定し、PRBSセルフテストを終了します。
1 2 3 4 5 6 7 8 9 10 Arrow