ft – -Translation – Keybot Dictionary

Spacer TTN Translation Network TTN TTN Login Deutsch Français Spacer Help
Source Languages Target Languages
Keybot 9 Results  odhack.asia
  Frequently Asked Questi...  
Momento Cable can also be installed with a 100 mm (4”) spacing for a 9W/sq. ft. (96W/m2).
Momento Câble peut également s’installer avec un espacement de 100 mm (4 po) pour une puissance de 9W/pi2 (96W / m2).
  Frequently Asked Questi...  
A.7: NEVER. The system will overheat. Heating power must not exceed 12W/sq. ft. (130W/m2).
R.7 : JAMAIS. Cela provoquerait une surchauffe. De plus, on doit se limiter à 12W/pi2 (130W/m2).
  Floor heating Momento C...  
For helping you measuring the surface to be heated (sq. ft / sq. m):
Comment mesurer votre superficie à chauffer (pi2 / m²) ?
  Frequently Asked Questi...  
A.4: No. MOMENTO believes that 12W/sq. ft. is the best watt density to optimize comfort and prevent floor overheating. Moreover, the 240V and 120V systems provide equal heating powerper square foot.
R.4 : Non. MOMENTO estime que 12W/pi2 (130W/m2) est une valeur à ne pas dépasser pour optimiser le confort sans entraîner une surchauffe du sol. Par ailleurs, les puissances au pi2 (m2) sont identiques en 240V et en 120V.
  Floor heating Momento C...  
Draw the space occupied by all the elements in the room (shower, bath, vanity, toilet [4 sq. ft or 0.37 sq. m], closets, washer, dryer, etc.) and subtracted them from the total area previously calculated.
Dessiner les espaces occupés par tous les éléments fixes (douche, bain, vanité, toilette (4 pi² ou 0,37 m²), armoires, laveuse, sécheuse, etc. ) et les soustraire de la surface totale de la pièce à chauffer.
  Floor heating Momento C...  
Always adhere to the maximum capacity of the thermostat or power unit (relay) which presently is limited to a current of 15 amps. In the present case, always refer to a limit of 300 sq. ft or ou 27.87 sq. m when connected to a 240Vac power circuit and to 150 sq.
Afin de toujours respecter la capacité maximale du thermostat ou de l’unité de puissance (relais) limités à 15 ampères. Veuillez toujours vous référer à une limite de 300 pi² ou 27,87 m² lorsque branché au 240 Vac et de 150 pi² ou 13,93 m² lorsque branché au 120 Vac pour ce thermostat ou cette unité de puissance.
  Floor heating Momento C...  
Always adhere to the maximum capacity of the thermostat or power unit (relay) which presently is limited to a current of 15 amps. In the present case, always refer to a limit of 300 sq. ft or ou 27.87 sq. m when connected to a 240Vac power circuit and to 150 sq.
Afin de toujours respecter la capacité maximale du thermostat ou de l’unité de puissance (relais) limités à 15 ampères. Veuillez toujours vous référer à une limite de 300 pi² ou 27,87 m² lorsque branché au 240 Vac et de 150 pi² ou 13,93 m² lorsque branché au 120 Vac pour ce thermostat ou cette unité de puissance.
  Frequently Asked Questi...  
A.11: Yes, and even more connected in parallel but the total power consumption must not exceed the capacity of the thermostat or power unit which the MAXIMUM CURRENT IS LIMITED TO 15 AMPS for each of them (Ex.: 300 ft² for 240 Vac and 150 ft² for 120 Vac).
R.11 : Oui, et même plus, branchés en parallèle, si la puissance totale ne dépasse pas les capacités du thermostat ou de l’unité de puissance limité par un courant maximal de 15 ampères pour chacun d’eux (Ex. : 300 pi² pour le 240 Vac et 150 pi² pour le 120 Vac ). Référez-vous aux tableaux des produits, afin de savoir quel est l’ampérage consommé par produit sélectionné.
  Frequently Asked Questi...  
A.11: Yes, and even more connected in parallel but the total power consumption must not exceed the capacity of the thermostat or power unit which the MAXIMUM CURRENT IS LIMITED TO 15 AMPS for each of them (Ex.: 300 ft² for 240 Vac and 150 ft² for 120 Vac).
R.11 : Oui, et même plus, branchés en parallèle, si la puissance totale ne dépasse pas les capacités du thermostat ou de l’unité de puissance limité par un courant maximal de 15 ampères pour chacun d’eux (Ex. : 300 pi² pour le 240 Vac et 150 pi² pour le 120 Vac ). Référez-vous aux tableaux des produits, afin de savoir quel est l’ampérage consommé par produit sélectionné.