bary – -Translation – Keybot Dictionary

Spacer TTN Translation Network TTN TTN Login Deutsch Français Spacer Help
Source Languages Target Languages
Keybot 7 Results  hearhear.org
  Graco SaniForce BES  
Maksymalne ciśnienie płynu 8,3 MPa (1200 psi, 83 bary)
Eliminates the need for booster pumps
Maximaler Materialdruck von 8,3 MPa (83 bar, 1200 psi)
Presión de fluido máxima de 1200 psi (83 bar, 8,3 MPa)
Portate fino a 400 l/min (100 g/min)
Nominale druk van 1200 psi (83 bar, 8,3 MPa)
Inflatable wiper creates a tight seal preventing contaminants from entering the container
Eliminates the need for booster pumps
En çok 100 galon/dak. (400 l/dak.) akış hızları
Maximum fluid pressure of 1200 psi (83 bar, 8.3 MPa)
En çok 100 galon/dak. (400 l/dak.) akış hızları
  Zawà³r sterujÄ…cy SDV15...  
10,5 MPa (1500 psi, 103 bary)
103 bars (1 500 psi)
103 bar (1.500 psi)
1.500 psi (103 bar)
103 bar (1.500 psi)
1,500 psi (103 bar)
1,500 psi (103 bar)
1,500 psi (103バール)
1,500 psi (103 bar)
1,500 psi (103 bar)
103 bars (1 500 psi)
1,500 psi (103 bar)
1,500 psi (103 bar)
1,500 psi (103 bar)
1,500 psi (103 bar)
1,500 psi (103 bar)
1,500 psi (103 bar)
1,500 psi (103 bar)
1,500 psi (103 bar)
1,500 psi (103 bar)
1,500 psi (103 bar)
1,500 psi (103 bar)
1,500 psi (103 bar)
1,500 psi (103 bar)
1,500 psi (103 bar)
  UrzÄ…dzenie rozÅ‚adowuj...  
Ciśnienie wylotowe 8,3 MPa (1200 psi, 83 bary)
Evacuation rates of up to 8.5 gpm (32 lpm), running at 60 cpm
Caudales de evacuación de hasta 8,5 gpm (32 lpm), funcionando a 60 cpm
Velocidade de evacuação de 32 lpm (8,5 gpm) a 60 cpm
1,200 psi (83 bar, 8.3 MPa)、出口圧力
Evacuation rates of up to 8.5 gpm (32 lpm), running at 60 cpm
La protection de garniture évite que les sacs ne rentrent dans la pompe
Evacuation rates of up to 8.5 gpm (32 lpm), running at 60 cpm
SaniForce 12:1 Sanitary Drum Unloader:
Evacuation rates of up to 8.5 gpm (32 lpm), running at 60 cpm
Evacuation rates of up to 8.5 gpm (32 lpm), running at 60 cpm
Evacuation rates of up to 8.5 gpm (32 lpm), running at 60 cpm
Evacuation rates of up to 8.5 gpm (32 lpm), running at 60 cpm
Evacuation rates of up to 8.5 gpm (32 lpm), running at 60 cpm
Evacuation rates of up to 8.5 gpm (32 lpm), running at 60 cpm
Evacuation rates of up to 8.5 gpm (32 lpm), running at 60 cpm
  Graco FinishPro II 395 PC  
Dostarcza 90,6 l/min przy 0,24 MPa (24 bary, 35 psi) — wystarczy, aby przebić najcięższe materiały
3,2 cfm bei 35 psi – ausreichend Luft zum Aufbrechen schwerster Materialien
El exclusivo descargador de presión hace que el funcionamiento sea más silencioso
Offre 3,2 cfm a 0,24 MPa, 2,41 bar (35 psi): ossia aria sufficiente per frantumare anche il più pesante dei materiali
Exclusivo Descarregador de Pressão resulta numa operação mais silenciosa
Levert 3,2 cfm bij 35 psi, voldoende om zelfs het zwaarste materiaal uiteen te halen
Tuottaa 3,2 cfm 35 psi:n paineella: riittävästi paineilmaa raskaimpienkin materiaalien rikkomiseen.
3,2 cfm (köbláb/perc) térfogatáram 35 psi nyomáson – elegendő levegőmennyiség a legnehezebb anyagok porlasztásához is
Užtikrina 3,2 cfm, esant 2,4 bar (35 psi) – pakankamai oro, kad būtų apdorotos ir pačios tvirčiausios medžiagos.
Leverer 0,09 m³/m ved 35 psi – nok luft til å bryte opp selv de kraftigste materialer
Výstupný výkon je 3,2 cfm pri hodnote tlaku 245 kPa (2,45 bar, 35 psi) – tento objem vzduchu postačuje aj na aplikáciu tých najťažších materiálov
35 psi basınçta 3,2 cfm verir; bu da en ağır malzemeleri kırmak için yeterlidir
Tā jauda ir 0,0015 m3/s (3,2 cfm), ja spiediens ir 241 316,505 Pa (35 psi) – pietiekams gaisa daudzums vissmagāko materiālu šķelšanai
Nudi 3,2 cf/m pri 0,25 MPa (2,5 bar, 35 psi) – dovolj zraka, da razbije tudi najtežje materiale.
35 psi basınçta 3,2 cfm verir; bu da en ağır malzemeleri kırmak için yeterlidir
يوفر 3.2 أقدام مكعبة في الدقيقة بمعدل 35 رطلاً لكل بوصة مربعة — هواء يكفي لفصل أثقل المواد
  Pompa tÅ‚okowa SaniForc...  
Maksymalne ciśnienie płynu 8,3 MPa (1200 psi, 83 bary)
Bomba de transferencia SaniForce 12:1:
Siphon bis 5.000 cps und bis 100.000 cps mit Eintauchen
Presiones máximas de fluido de hasta 1200 psi (83 bar, 8,3 MPa)
Sifon tot 5.000 cps en tot 100.000 cps bij onderdompeling
最大液体圧力最高1200 psi (83 bar、8.3 MPa)
最大流体压力为 1200 psi(83 bar,8.3 MPa)
Sifon en çok 5.000 devir/sn. ve daldırılmışsa en çok 100.000 devir/sn.
  Graco FinishPro II 595 ...  
Dostarcza 90,6 l/min przy 0,24 MPa (24 bary, 35 psi) — wystarczy, aby przebić najcięższe materiały
3,2 cfm bei 35 psi – ausreichend Luft zum Aufbrechen schwerster Materialien
El exclusivo descargador de presión hace que el funcionamiento sea más silencioso
Offre 3,2 cfm a 0,24 MPa, 2,41 bar (35 psi): ossia aria sufficiente per frantumare anche il più pesante dei materiali
Exclusivo Descarregador de Pressão resulta numa operação mais silenciosa
Levert 3,2 cfm bij 35 psi, voldoende om zelfs het zwaarste materiaal uiteen te halen
Tuottaa 3,2 cfm 35 psi:n paineella: riittävästi paineilmaa raskaimpienkin materiaalien rikkomiseen.
3,2 cfm (köbláb/perc) térfogatáram 35 psi nyomáson – elegendő levegőmennyiség a legnehezebb anyagok porlasztásához is
Užtikrina 3,2 cfm, esant 2,4 bar (35 psi) – pakankamai oro, kad būtų apdorotos ir pačios tvirčiausios medžiagos.
Leverer 0,09 m³/m ved 35 psi – nok luft til å bryte opp selv de kraftigste materialer
Delivers 3.2 cfm at 35 psi—enough air to break up the heaviest of materials
Výstupný výkon je 3,2 cfm pri hodnote tlaku 245 kPa (2,45 bar, 35 psi) – tento objem vzduchu postačuje aj na aplikáciu tých najťažších materiálov
35 psi basınçta 3,2 cfm verir; bu da en ağır malzemeleri kırmak için yeterlidir
Tā jauda ir 0,0015 m3/s (3,2 cfm), ja spiediens ir 241 316,505 Pa (35 psi) – pietiekams gaisa daudzums vissmagāko materiālu šķelšanai
Nudi 3,2 cf/m pri 0,25 MPa (2,5 bar, 35 psi) – dovolj zraka, da razbije tudi najtežje materiale.
35 psi basınçta 3,2 cfm verir; bu da en ağır malzemeleri kırmak için yeterlidir
يوفر 3.2 أقدام مكعبة في الدقيقة بمعدل 35 رطلاً لكل بوصة مربعة — هواء يكفي لفصل أثقل المواد
  Pompy dozowania na żą...  
Ta pompa na żądanie umożliwia utrzymanie dostępności powietrza dla narzędzi zakładowych! Dzięki mocy do 4,4 MPa (650 psi, 44 bary) i natężeniu przepływu 15 l/min (4 gal/min) można z łatwością dodać dozowanie oleju do prowadzonych operacji bez konieczności wymiany sprężarki.
Aria sempre disponibile per gli utensili di officina con questa pompa su richiesta! Con un'uscita pari a 44 bar (650 psi) e 15 l/m (4 g/m), potete facilmente aggiungere erogazione di olio alla vostra operazione senza sostituire il compressore. La nostra linea di pompe APEX è disponibile con configurazioni CA e CC per soddisfare tutte le esigenze di trasferimento dei fluidi!
Keep air available for shop tools with this on-demand pump! With output up to 650 psi (44 bar) and 4 gpm (15 lpm), you can easily add oil dispense to your operation without replacing your compressor. Our line of APEX pumps are available in AC and DC configurations to meet your fluid transfer needs!
Keep air available for shop tools with this on-demand pump! With output up to 650 psi (44 bar) and 4 gpm (15 lpm), you can easily add oil dispense to your operation without replacing your compressor. Our line of APEX pumps are available in AC and DC configurations to meet your fluid transfer needs!
Keep air available for shop tools with this on-demand pump! With output up to 650 psi (44 bar) and 4 gpm (15 lpm), you can easily add oil dispense to your operation without replacing your compressor. Our line of APEX pumps are available in AC and DC configurations to meet your fluid transfer needs!
Keep air available for shop tools with this on-demand pump! With output up to 650 psi (44 bar) and 4 gpm (15 lpm), you can easily add oil dispense to your operation without replacing your compressor. Our line of APEX pumps are available in AC and DC configurations to meet your fluid transfer needs!
Keep air available for shop tools with this on-demand pump! With output up to 650 psi (44 bar) and 4 gpm (15 lpm), you can easily add oil dispense to your operation without replacing your compressor. Our line of APEX pumps are available in AC and DC configurations to meet your fluid transfer needs!
Keep air available for shop tools with this on-demand pump! With output up to 650 psi (44 bar) and 4 gpm (15 lpm), you can easily add oil dispense to your operation without replacing your compressor. Our line of APEX pumps are available in AC and DC configurations to meet your fluid transfer needs!
Keep air available for shop tools with this on-demand pump! With output up to 650 psi (44 bar) and 4 gpm (15 lpm), you can easily add oil dispense to your operation without replacing your compressor. Our line of APEX pumps are available in AC and DC configurations to meet your fluid transfer needs!
Keep air available for shop tools with this on-demand pump! With output up to 650 psi (44 bar) and 4 gpm (15 lpm), you can easily add oil dispense to your operation without replacing your compressor. Our line of APEX pumps are available in AC and DC configurations to meet your fluid transfer needs!
Keep air available for shop tools with this on-demand pump! With output up to 650 psi (44 bar) and 4 gpm (15 lpm), you can easily add oil dispense to your operation without replacing your compressor. Our line of APEX pumps are available in AC and DC configurations to meet your fluid transfer needs!