adc – -Translation – Keybot Dictionary

Spacer TTN Translation Network TTN TTN Login Deutsch Français Spacer Help
Source Languages Target Languages
Keybot 8 Results  hepcats.pl
  2GSPlus ADC Modul | News  
2GSPlus ADC Module
2GSPlus ADC Modul
  ADDA-MGT-Board | News  
In this application the Xilinx Virtex-5-SXT chip is used for pre- and post-processing of DAC and ADC data streams and for controlling of the connected analog RF circuits.
In dieser Anwendung wird der Xilinx Virtex-5-SXT-Chip für die Datenbearbeitung der DAC- und ADC-Datenströme und zur Steuerung der angeschlossenen analogen HF-Schaltungen eingesetzt.
  Virtex6 ADC Board | News  
The Virtex6 ADC Board is designed for four channel A/D conversion and digital post-processing. It supports several serial high speed interfaces like CPRI, PCIe, SATA, SRIO and Ethernet.
Das Virtex6 ADC Board wurde konzipiert für 4-Kanal A/D-Umsetzung und digitale Signalverarbeitung der empfangenen Datenströme. Das Board verfügt über diverse breitbandige Schnittstellen wie PCIexpress, SATA, SRIO, CPRI (optische SFP Module) und 1GB Ethernet.
  Virtex6 ADC Board | News  
In a typical application the Xilinx Virtex-6-SXT FPGA is used for digital down-conversion and filtering of the received ADC data streams and for controlling of the connected analog RF circuits. Two double ADC converters (ADS62P49) with 14 bit resolution and up to 250 MHz sampling frequency are included on board.
Eine typische Anwendung ist die digitale I/Q Demodulation und Filterung der empfangenen A/D- gewandelten Datenströme sowie die Steuerung der angeschlossenen analogen HF Baugruppen. Zwei duale A/D Umsetzer mit 14 Bit Wortbreite (ADS62P49) und einer maximalen Abtastfrequenz von 250 MHz sind auf dem Board integriert. Ein FPGA des Typs Xilinx Spartan 3AN ist für die Programmierung und Konfiguration der Hardware über ein separates 100/10MB Ethernet interface vorgesehen. mehr
  2GSPlus ADC Modul | News  
The 2GSPlus ADC Module is designed for A/D conversion from 1GSamples up to 3GSamples. The board includes four National Semiconductor A/D converter chips ADC08300 and a Xilinx CPLD chip XC2C512 for configuration and control of the connected analog RF circuits.
Das 2GSPlus ADC Modul ist für die Analog-/Digitalumsetzung im Bereich von 1GSample bis zu 3GSample entwickelt worden. Das Board verfügt über vier National Semiconductor A/D Wandler Chips ADC08300 und ein Xilinx CPLD Chip XC2C512 für die Konfiguration und zur Kontrolle der analogen RF-Schaltungsteile. Die Spannungsversorgung und die Takterzeugung werden auf dem Board realisiert. Das 2GSPlus ADC Modul ist für die Kombination mit dem IAF FPGA Board FFP Basic+ entwickelt, kann aber auch als Standalone-Lösung verwendet werden.
  Virtex6 ADC Board | News  
In a typical application the Xilinx Virtex-6-SXT FPGA is used for digital down-conversion and filtering of the received ADC data streams and for controlling of the connected analog RF circuits. Two double ADC converters (ADS62P49) with 14 bit resolution and up to 250 MHz sampling frequency are included on board.
Eine typische Anwendung ist die digitale I/Q Demodulation und Filterung der empfangenen A/D- gewandelten Datenströme sowie die Steuerung der angeschlossenen analogen HF Baugruppen. Zwei duale A/D Umsetzer mit 14 Bit Wortbreite (ADS62P49) und einer maximalen Abtastfrequenz von 250 MHz sind auf dem Board integriert. Ein FPGA des Typs Xilinx Spartan 3AN ist für die Programmierung und Konfiguration der Hardware über ein separates 100/10MB Ethernet interface vorgesehen. mehr
  2GSPlus ADC Modul | News  
The 2GSPlus ADC Module is designed for A/D conversion from 1GSamples up to 3GSamples. The board includes four National Semiconductor A/D converter chips ADC08300 and a Xilinx CPLD chip XC2C512 for configuration and control of the connected analog RF circuits.
Das 2GSPlus ADC Modul ist für die Analog-/Digitalumsetzung im Bereich von 1GSample bis zu 3GSample entwickelt worden. Das Board verfügt über vier National Semiconductor A/D Wandler Chips ADC08300 und ein Xilinx CPLD Chip XC2C512 für die Konfiguration und zur Kontrolle der analogen RF-Schaltungsteile. Die Spannungsversorgung und die Takterzeugung werden auf dem Board realisiert. Das 2GSPlus ADC Modul ist für die Kombination mit dem IAF FPGA Board FFP Basic+ entwickelt, kann aber auch als Standalone-Lösung verwendet werden.